SA-E06 EDGE™ Carbine Replica

EDGE™ is a line of replicas by Specna Arms that combines an array of solutions and technologies hard to find in other replicas on the market. It is a series that puts stress on very good craftsmanship of the exterior, solutions that improve upon the versatility of the replica, prolong its lifetime, simplify the diagnostics of a malfunction as well as facilitate the possibility of a power tuning. Straight out of the box you get a replica that does not require any modification, however, if needed - they will be extremely simple. 

Every element of the replica had been made and fitted with the utmost care for every detail. In addition, the body features a Nano Coating finish that prevents scratches. The body also bears Specna Arms markings as well as an individual serial number further authenticated by an additional hologram. Details that deserve note also include the QD pistol grip that provides easy and rapid access to the motor without having to use tools as well as a double-sided loop for the attachment of a tactical sling.

SA-E06 carbine replica is equipped with a free-float handguard in RIS 22 mm system. Apart from a long, top RIS rail that features flip-up iron sights, the replica also has a short rail under the barrel and on the sides. 

The carbine features a factory-fitted MOSFET X-ASR module by Polish GATE. It is an unprecedented cooperation between a Polish manufacturer and a factory known for its airsoft replicas. The highest-quality MOSFET X-ASR looks after the safety of the replica components, improves the trigger reaction and extends the lifetime of electronics and the battery. It will also enable diagnosing basic malfunctions inside the replica thanks to integrated status diodes. 

The replica features an internal precision barrel with 6.03 mm in diameter that provides high accuracy and repeatability of fired shots. The barrel works in tandem with a new type of a Hop-Up rotary chamber that allows for a very precise and stable adjustment of the BB spin. 

The replica features an ESA™ Quick Spring Exchange System. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - all that is required is to remove the stock slide in order to gain access to the spring so that it can be removed without having to pull out or disassemble the gearbox. 

The advantages of the ESA™ system are hard to overstate. In the light of current internal regulations inside various groups, the system guarantees the user a varied set of possibilities and plenty of freedom. ESA™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and the safety for the user himself as well as other participants. Inside the box, along with the replica, is another M90 main spring that is excellent for indoor operations.

The heart of the replica consists of the ORION gearbox based on a reinforced frame and equipped with the function of the main spring release. The replica features an arrays of high-grade parts right out of the box, which makes it characteristic for its reliability and preparedness for further tuning. ORION gearbox is ready for cooperation with M140 springs. Inside, there are elements such as:

- reinforced polymer piston with a full, steel jaw
- aluminum, air-sealed nozzle
- aluminum, double air-sealed cylinder head
- aluminum, double air-sealed piston head with bearings
- bearing-mounted spring slide
- set of steel gears
- 8 mm ball bearings

The box, apart from the replica, includes two Mid-Cap S-MAG magazines with a capacity of 125 BBs each. S-MAG is an exclusive polymer magazine designed by Specna Arms. Noteworthy is the characteristic texture comprised of Specna Arms logos. S-mag facilitates a seamless feeding of BBs even at high ROF.

The set does not include a battery or a charger.

The set includes:

- replica
- 2 x S-MAG Mid-Cap magazine
- additional M90 main spring
- User’s manual
- certificate
- GATE X-ASR diagnostics card
- vertical grip

Nuprol Delta Freedom fighter Compact PDW M4 in Black

Brand    Nuprol

EAN    754220671280

Weight (g)    2550

Fire Modes    Semi/Full-Auto

Barrel Bore (mm)    6.03

Approx. FPS    320

Main Materials    Metal - Receiver, Handguard Polymer Grip, Stock

Included    1 x Delta AEG Rifle

1 x RIS Front Sight

1 x RIS Rear Sight

1 x RIS Folding Vertical Grip

1 x Hi-Cap Magazine

1 x Cleaning / Unjamming rod

1 x Manual

Compatible Magazines    Nuprol M4 Magazines

Nuprol N-Magazines

Nuprol L-Magazines

Compatible Batteries / Gas    8050 - 1100mAh 7.4v 20c Stick

Other Info/Specs    Reinforced V2 Gearbox

Full Steel Tooth Piston

Metal Rear Sling plate

Micro-Switch Trigger System

SA FLEX SA-F03 Carbine Replica

Specna Arms proudly presents the FLEX ™ line of replicas. An affordable price combined with an innovative quick spring change system, great performance straight out of the box and high-quality components makes this series an excellent choice for both beginners and experienced airsoft players alike.   

The receiver, the stock tube with the enlarged SF type stock housing the battery, as well as the front in the M-LOK standard and the pistol grip are made out of polymer plastic reinforced with nylon fiber. Other components, such as the barrel, flash hider and the enlarged reloading handle are made out of metal (all screws, pins, the case ejector flap and dummy bolt are made out of steel). There are markings and a serial number on the receiver.

Features of the replica:

- Front in the M-LOK standard

- Flip-up sights.

- The barrel of the replica has a 14mm CCW thread

- The replica has been fully adapted to work with LiPo and LiFe batteries. 

Inside the replica you will find:

- ESA ™ quick spring change system. This allows for quick and efficient adjustment of the replicas muzzle velocity. 

- 8mm plain bearings. 

- Steel gears. -Polycarbonate plastic piston with a full steel teeth.

- Rotary hop up chamber.

- 6,03mm Precision Barrel.

The set does not include a battery or a charger.

The set includes:

- replica
- magazine
- additional M90 main spring
- User’s manual
- QC certificate

SA-C07 CORE™ Carbine Replica

Specna Arms meets the expectations of clients by presenting the CORE™ line of products - an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

The replica features complete, licensed markings of the firearms manufacturer - Rock River Arms. It is a firearm parts and accessories manufacturer but, most of all, a manufacturer of high-quality AR-15 carbines. The company was founded in 1996 by Larson brothers in cooperation with Les Baer and it is based in Colona, Illinois. Today, RRA supplies under a contract AR-15 carbines to anti-narcotic DEA agency, FBI or US Marshals.

The receiver, stock slide and an SF stock that holds the battery, as well as the pistol grip, were made from nylon reinforced polymer. Remaining components such as the barrel, KeyMod handguard, flash hider, enlarged charging handle and tactical sling swivels were made of metal (parts made of steel include the screws, pins, shell ejection window and mock bolt carrier). The receiver bears markings and a serial number.

The replica’s parts fit very well together and the User will not experience any loose spots between the lower and upper receiver. The use of a light polymer receiver allowed for a reduced weight, which makes it very suitable for dynamic games or long-lasting mil-sims. What’s more, fiberglass reinforcement makes the receiver also more durable than polymer and metal receivers. 

The replica features a ESA™ Quick Spring Change System. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - all that is required is to remove the stock slide in order to gain access to the spring so that it can be removed without having to pull out or disassemble the gearbox.

The advantages of ESA™ system are hard to overstate. In the light of the current internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. ESA™ system allows with a minimal amount of time to change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to a base muzzle velocity of ~380 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows reducing the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.

The gearbox contains 8 mm slide bearings as well as shimmed steel gears based on them. The system is secured with four anti-reversal latches. A light, made of a polycarbonate polymer piston is equipped with a full steel strip, in order to increase its durability. Also, implemented were a type 1 cylinder and a steel circuit-breaker, as well as a precise rotary Hop-Up chamber. The durability of parts allows for the cooperation with M140 springs.

The precisely-made rotary type Hop-Up chamber perfectly fit with high quality 6,03 precision barrel. The use of precision barrel has a positive effect on the range and accuracy of the replica. 

The replica is equipped with a 22 mm top RIS rail, Keymod handguard and an adjustable stock. The top RIS rail features flip-up iron sights that do not collide with optoelectronic aiming devices. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. The silencer is based on a 14 mm left-handed thread.

The set includes:

- replica
- magazine
- fixed iron sights
- additional main spring

SA-G12 EBB Carbine Replica

The well-known on the airsoft market Specna Arms presents SA-G series!SA-G replicas with their level of craftsmanship can compete with replicas by top manufacturers! G-Series consists of carbines in several interesting configurations, including models equipped with an integrated scope, bipod or a KeyMod handguard.

The replica, similarly to the original, was made of durable polymer, metal and, in the most vulnerable places, steel (steel parts include screws, pins and tactical sling adapters). The replica is equipped with a RIS 22 mm handguard (on the top, in the bottom and on the sides).

The replica is characteristic for its very good alignment of parts as well as the fact that it was made of matte polymer. The more important elements were joined with pins. This way specific elements can be changed, for instance, the magazine well. The receiver of the replica made of solid polymer features an individual serial number, manufacturer markings and aesthetic fire mode selector symbols. The top of the replica features a classic transport handle with a RIS 22 mm rail as well as adjustable, fixed iron sights. The replica features a stock foldable to the side, which simplifies the transportation and operating in tight corners. The metal barrel features a flash hider mounted on a 14 mm CW thread.

The heart of the replica consists of a LiPo Ready gearbox V3 with an installed micro-connector. The gearbox is fully adjusted for modifications and the implementation of a micro-connector positively influences the trigger reaction speed and rate of fire of the replica.

The replica is fully compatible with LiPo and LiFe batteries. Due to a base muzzle velocity of ~380 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range.

The replica features a quick spring release system - Enter & Convert™. In order to gain the access to the gearbox, all that is necessary is to remove the pin located in the latch blocking the stock. In this way, the access to the main spring guide is gained, which can be quickly and easily pulled out through the backside of the gearbox. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools. The entire spring exchange lasts 45 seconds and requires only a single screwdriver.

The replica, similarly to the original, was adapted for use by both left- and right-handed Users thanks to a double-sided fire mode selector plate.

The replica uses an interesting solution in the form of EBB (Electric Blow Back) system that sets the bolt carrier into motions, increasing the realism and bringing it closer to the live firearm original.

The set includes a Hi-Cap magazine with a capacity of up to 350 BBs.

Every replica undergoes, as early as still in the factory, a pre-delivery inspection validated by a special certificate with a hologram and an individual serial number assigned to every replica.

The set does not include a battery or a charger.

The set includes:

- replica

- magazine

- extra M90 main spring

- certificate

- manual

RRA SA-C02 CORE™ Carbine Replica 

Specna Arms meets the expectations of clients by presenting the CORE™ line of products - an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

The replica features complete, licensed markings of the firearms manufacturer - Rock River Arms. It is a firearm parts and accessories manufacturer but, most of all, a manufacturer of high-quality AR-15 carbines. The company was founded in 1996 by Larson brothers in cooperation with Les Baer and it is based in Colona, Illinois. Today, RRA supplies under a contract AR-15 carbines to anti-narcotic DEA agency, FBI or US Marshals. 

The receiver, stock slide, handguard and a SF stock that holds the battery, as well as the pistol grip, were made from fiber-glass reinforced polymer. Remaining components such as the barrel, flash hider, enlarged charging handle and tactical sling swivels were made of metal (parts made of steel include the screws, pins, shell ejection window and mock bolt carrier). The receiver bears markings and a serial number.

The replica’s parts fit very well together and the User will not experience any loose spots between the lower and upper receiver. The use of a light polymer receiver allowed for a reduced weight, which makes it very suitable for dynamic games or long-lasting mil-sims. What’s more, fiberglass reinforcement makes the receiver also more durable than polymer and metal receivers. 

The replica features a ESA™ Quick Spring Change System. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - all that is required is to remove the stock slide in order to gain access to the spring so that it can be removed without having to pull out or disassemble the gearbox. 

The advantages of ESA™ system are hard to overstate. In the light of the current internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. ESA™ system allows with a minimal amount of time to change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to a base muzzle velocity of ~380 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows reducing the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.

The gearbox contains 8 mm slide bearings as well as shimmed steel gears based on them. The system is secured with four anti-reversal latches. A light, made of a polycarbonate polymer piston is equipped with a full steel strip, in order to increase its durability. Also, implemented were a type 0 cylinder and a steel circuit-breaker, as well as a precise rotary Hop-Up chamber. The durability of parts allows for the cooperation with M140 springs.

The precisely-made rotary type Hop-Up chamber perfectly fit with high quality 6,03 precision barrel. The use of precision barrel has a positive effect on the range and accuracy of the replica. 

The replica is equipped with a 22 mm top RIS rail and an adjustable stock. The top RIS rail features a classic transport handle along with a rear sight. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. A standard flash hider is based on 14 mm left-handed thread, which allows the attachment of a silencer in its place.

The set includes:

- replica
- magazine
- fixed iron sights
- additional main spring

RRA SA-C02 CORE™ Carbine Replica 

Specna Arms meets the expectations of clients by presenting the CORE™ line of products - an exceptional series of replicas that introduces a new quality to the market. An attractive price in combination with an innovative spring change system as well as high-quality materials make this replica suitable for beginners and seasoned airsoft players alike.

The replica features complete, licensed markings of the firearms manufacturer - Rock River Arms. It is a firearm parts and accessories manufacturer but, most of all, a manufacturer of high-quality AR-15 carbines. The company was founded in 1996 by Larson brothers in cooperation with Les Baer and it is based in Colona, Illinois. Today, RRA supplies under a contract AR-15 carbines to anti-narcotic DEA agency, FBI or US Marshals. 

The receiver, stock slide, handguard and a SF stock that holds the battery, as well as the pistol grip, were made from fiber-glass reinforced polymer. Remaining components such as the barrel, flash hider, enlarged charging handle and tactical sling swivels were made of metal (parts made of steel include the screws, pins, shell ejection window and mock bolt carrier). The receiver bears markings and a serial number.

The replica’s parts fit very well together and the User will not experience any loose spots between the lower and upper receiver. The use of a light polymer receiver allowed for a reduced weight, which makes it very suitable for dynamic games or long-lasting mil-sims. What’s more, fiberglass reinforcement makes the receiver also more durable than polymer and metal receivers. 

The replica features a ESA™ Quick Spring Change System. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools - all that is required is to remove the stock slide in order to gain access to the spring so that it can be removed without having to pull out or disassemble the gearbox. 

The advantages of ESA™ system are hard to overstate. In the light of the current internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. ESA™ system allows with a minimal amount of time to change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to a base muzzle velocity of ~380 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows reducing the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.

The gearbox contains 8 mm slide bearings as well as shimmed steel gears based on them. The system is secured with four anti-reversal latches. A light, made of a polycarbonate polymer piston is equipped with a full steel strip, in order to increase its durability. Also, implemented were a type 0 cylinder and a steel circuit-breaker, as well as a precise rotary Hop-Up chamber. The durability of parts allows for the cooperation with M140 springs.

The precisely-made rotary type Hop-Up chamber perfectly fit with high quality 6,03 precision barrel. The use of precision barrel has a positive effect on the range and accuracy of the replica. 

The replica is equipped with a 22 mm top RIS rail and an adjustable stock. The top RIS rail features a classic transport handle along with a rear sight. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. A standard flash hider is based on 14 mm left-handed thread, which allows the attachment of a silencer in its place.

The set includes:

- replica
- magazine
- fixed iron sights
- additional main spring